How Can You Check Scan Trajectory and Photo Quality Before Delivery?
On this page
Quality control has two stages: during capture, use the SHARE Capture app to confirm coverage, loop closure, and trajectory continuity, and recapture any gap before leaving the site; after reconstruction, use SHARE PointClouds Studio V2.6 to link the processed trajectory, photo points, photos, and plan/3D views to locate anomalies and review coverage. Office review cannot restore information that was not captured in the field and does not establish accuracy on its own.

Figure 1: Trajectories, photo points, photos, and plan/3D views form a linked inspection workflow.
Add Route and Image Context to Final Point-Cloud Review
In projects involving long corridors, repetitive structures, underground spaces, industrial plants, or transitions between indoor and outdoor areas, a point cloud may appear continuous while still containing an unclosed route, localized gaps, unclear photo correspondence, or anomalous segments. If these issues surface only during computer-aided design (CAD) or building information modeling (BIM) production or customer acceptance, cleaning and filtering cannot recover missing site information. Downstream work depends on a traceable capture path. The practical role of trajectory visualization is therefore not simply to show an extra colored line; it creates a quality-control entry point before and after leaving the site.
The SHARE PointClouds Studio V2.6 Pre-Delivery Inspection Workflow
1. Plan Loops and Review Points Before Capture
Based on the specific configuration and use case of simultaneous localization and mapping (SLAM) systems such as the SHARE SLAM S20, SHARE SLAM S20 SE, SHARE SLAM S100, or the SHARE C10 Series, plan the start and end points, loop closures, narrow passages, stairs, indoor-outdoor transitions, and priority areas for supplementary scanning. Do not treat “completing the route” as the only objective; define in advance what you will inspect afterward.
2. Review the Trajectory First After Processing
Check whether the route covers the planned area, forms a reasonable loop, and contains sudden jumps, abnormal backtracking, or prolonged stops. A trajectory anomaly is only a clue and must be interpreted alongside the point cloud and field records.
3. Link Photo Points and Undistorted Photos
Click a trajectory or photo point to view the corresponding photo and 3D location. Focus on confirming whether:
- Doorways, corners, the backs of equipment, and occluded areas were actually traversed;
- Images correspond to the correct locations and directions;
- Usable images are available in indoor-outdoor zones with significant lighting changes;
- Areas intended for 3D Gaussian splatting (3DGS) photorealistic viewing or colored point clouds have sufficient photo coverage.

Figure 2: Image Comparison links the plan view, trajectory, photo locations, Photo Display window, and 3D viewport.
4. Verify Coverage in Plan and 3D Views
The plan view is well suited to checking rooms, corridors, and loop closures; the 3D view is better for stairs, atriums, steel structures, pipelines, and multilevel spaces. Linking the two helps prevent missed issues caused by relying on a single viewpoint.
5. Turn Anomalies into Corrective Actions
- Coverage gap: perform a supplementary scan where site conditions allow;
- Unclear relationship between multiple datasets: use manual corresponding-point registration and verify independently;
- Coordinate or global navigation satellite system (GNSS) risk: use an external post-processed kinematic (PPK) tool to generate an RTKLIB POS trajectory file, select it in SHARE PointClouds Studio only as the
Trajectory SourceinGNSS Fusion, and then complete coordinate transformation and independent check point validation as required; - Insufficient imagery: do not position that area as a focus for 3DGS photorealistic viewing or panoramic presentation;
- Algorithm anomaly: retain the raw data, project, result, version information, and sanitized logs for support.
6. Perform Independent Validation Before Survey Deliverables Are Issued
Linked trajectories and photos support process inspection; they do not replace a 3D/elevation accuracy check, dimensional verification, or project acceptance.
Observable Benefits
| Review condition | SHARE PointClouds Studio V2.6 workflow | Practical benefit |
|---|---|---|
| Final point-cloud review lacks route context | Trajectory visualization adds route context | Supports review of potential gaps, jumps, and loop-closure conditions |
| Image coverage needs spatial context | Linked photo points, photos, and 3D views | Image coverage and correspondence are easier to verify |
| A visible anomaly requires follow-up | Route the finding into supplementary scanning, registration, coordinate, or support workflows | Converts an observation into a defined corrective action |
| Downstream teams need source context | Organize trajectories, photos, and inspection records with the project | Helps downstream teams understand the data source and documented areas of risk |
| Trajectory appearance needs independent validation | Use independent check points for final validation | Keeps process inspection separate from evidence of result accuracy |
Use Cases That Benefit Most
- Underground sites, tunnels, and long corridors;
- Industrial plants, equipment rooms, steel structures, and heavily occluded spaces;
- Multistory renovation surveys and as-built documentation;
- Continuous indoor-outdoor capture and areas with changing real-time kinematic (RTK)/GNSS conditions;
- Projects requiring colored point clouds or 3DGS photorealistic viewing; SHARE PointClouds Studio V2.6 panoramic stitching supports SHARE SLAM S100-32 PRO and SHARE C10-32 PRO for field-image review and browsing, not as a measurement deliverable.
How to Quantify the Benefits
Possible metrics include the number of coverage gaps found after processing, the proportion of supplementary scans completed before leaving the site, the number of return visits avoided through trajectory/photo review, the time required to locate anomalies, and the number of datasets returned before entering CAD. Do not make fixed efficiency promises; compare these process metrics across similar projects instead.
Frequently Asked Questions
Q1: If the trajectory appears to form a closed loop, does that prove the point cloud meets accuracy requirements? No. Trajectory inspection helps identify process anomalies. Accuracy must be validated against project tolerances using independent check points.
Q2: Can linked photo points replace field photo management? They improve spatial correspondence, but original images and authorization records should still be retained by project number, area, and time.
Q3: Are enough photos sufficient to generate a measurable 3DGS result? No. 3DGS is intended for realistic visual browsing, not as a survey deliverable. Measurement and CAD work should be based on the point cloud.
Q4: Will the software fix anomalies found in the trajectory on its own? Trajectory visualization is primarily an inspection tool. Depending on the anomaly, the next step may be supplementary scanning, manual corresponding-point registration, coordinate processing, or technical support; the software does not repair trajectory anomalies automatically.
Q5: What should I do if the field preview shows that the trajectory does not cover the target area? First use the SHARE Capture app to check live point-cloud coverage and the trajectory preview. If there are obvious gaps, an incomplete loop, or abnormal jumps, adjust the route and recapture the area on site, then confirm that saving succeeded before ending the task. After leaving the site, reconstruction and point-cloud cropping cannot restore spatial information that was never captured.
PROJECT SUPPORT

