Skip to content
Search
  • Home
  • Products
    • 3D LiDAR Scanners
      • SHARE SLAM S20
      • SHARE SLAM S20 SE
      • SHARE C1 PRO
      • SHARE C1 3D Spatial Camera
      • SHARE SLAM S100 Series
    • Quick S20 Links
      • S20 · US Warehouse
      • S20 · EU Warehouse
      • S20 · UK Warehouse
      • S20 · Global
      • S20 · Certified Demo Unit
    • Accessories
      • Surveying Pole Adapter
      • Adapter For Robot Dog
      • RTK Module Kit
    • Shop by Delivery Region
      • Global / CN Warehouse
      • US Warehouse
      • EU Warehouse
      • UK Warehouse
      • View all delivery regions
  • Support
    • Download APP
    • Resources
      • Solutions
      • Guides
      • News
    • Quick Guide
      • SHARE SLAM S20
      • Unboxing & First Check
      • Data Processing
    • Software Introduction
      • SHARE PointClouds Studio
  • Redeem Gifts
    • Redeem Gifts
    • SHARE3DCAM Works
  • Contact
  • About Us
SHARE3DCAMSHARE3DCAM
  • Country

  • Search
  • Login
  • Cart
    0 items 0
  • Home
  • Products
    • 3D LiDAR Scanners
      • SHARE SLAM S20
      • SHARE SLAM S20 SE
      • SHARE C1 PRO
      • SHARE C1 3D Spatial Camera
      • SHARE SLAM S100 Series
    • Quick S20 Links
      • S20 · US Warehouse
      • S20 · EU Warehouse
      • S20 · UK Warehouse
      • S20 · Global
      • S20 · Certified Demo Unit
    • Accessories
      • Surveying Pole Adapter
      • Adapter For Robot Dog
      • RTK Module Kit
    • Shop by Delivery Region
      • Global / CN Warehouse
      • US Warehouse
      • EU Warehouse
      • UK Warehouse
      • View all delivery regions
  • Support
    • Download APP
    • Resources
      • Solutions
      • Guides
      • News
    • Quick Guide
      • SHARE SLAM S20
      • Unboxing & First Check
      • Data Processing
    • Software Introduction
      • SHARE PointClouds Studio
  • Redeem Gifts
    • Redeem Gifts
    • SHARE3DCAM Works
  • Contact
  • About Us

Country

Account
0

Your cart is empty

Continue shopping
Basics

How Do You Complete Your First SHARE SLAM Scan? A Step-by-Step Getting Started Guide

Get started with SHARE SLAM from unboxing and initialization to phone connection, first capture, storage checks, and safe data saving.
Sep 13, 2026
6 min read
How Do You Complete Your First SHARE SLAM Scan? A Step-by-Step Getting Started Guide

On this page

    On this page

      Prepare, Capture, Process, and Verify a First Scan

      Before using a SHARE3DCAM handheld 3D scanner for the first time, confirm the device status and accessories, then follow a controlled sequence: power on and initialize → connect the phone → plan and capture the route → monitor coverage in real time → form a loop-closure constraint → confirm that the data is saved. These scanners use simultaneous localization and mapping (SLAM) to estimate their motion while building a point cloud. This guide applies to SHARE SLAM S20, SHARE SLAM S20 SE, SHARE SLAM S100, and SHARE C10 Series devices. It covers unboxing checks, initialization, phone connection, field capture, and save confirmation so that teams working in interior measurement, building inspection, or as-built surveying can complete a first scan through a reviewable process.

      Product rendering of the SHARE SLAM S20 handheld 3D laser scanner

      Figure 1: SHARE SLAM S20 handheld 3D laser scanner.

      Unboxing Checks

      After unboxing your SHARE SLAM device, first confirm that the main device, battery handle, charger, positioning plate, card reader, cleaning cloth, user manual, data cable, and phone mount are present.

      Key checks:

      1. Make sure the main device and battery handle are properly installed (the latch is fully engaged, with no unusual noise when gently moved);
      2. Clean the lenses: Use the included cleaning cloth to wipe the fisheye lenses and light detection and ranging (LiDAR) window. Dust can affect scan quality;
      3. Battery: Fully charge the handle battery before heading to the site. For extended fieldwork, plan battery swaps or use a compatible external power solution according to the current product documentation;
      4. Storage: Confirm that the TF card is inserted and correctly formatted (UHS-I U3/V30 or higher and NTFS format are recommended; a slow card may result in incomplete data saving).

      Device Initialization

      1. Power on: Install the battery handle, press the power button, and wait for the device self-check to finish;
      2. Check status: Use the mobile app to review device health, including battery level, storage, and firmware version;
      3. Update firmware: Before first use, confirm that the firmware is up to date. Back up your data and ensure sufficient battery power before upgrading;
      4. Position for initialization: The sensors must initialize after startup. Place the device near the center of the room, away from corners, windows, and walls. This helps the simultaneous localization and mapping (SLAM) system determine its initial pose more reliably. It is a general best practice for handheld SLAM devices and applies equally to SHARE SLAM.

      Connecting Your Phone

      1. Download and open SHARE Capture, the mobile data-capture app available for Android and iOS;
      2. Turn on both Wi-Fi and Bluetooth on your phone—Wi-Fi alone is not sufficient;
      3. Connect to the device’s Wi-Fi (the first connection requires pairing; the device supports one-tap encrypted pairing over Bluetooth);
      4. The connection is successful when the live preview appears in the app;
      5. Device activation requires your phone’s mobile data connection to access the server. The device Wi-Fi is only for phone-to-device communication and does not provide internet access.

      Your First Scan

      Seven-step first-scan workflow, from unboxing checks, initialization, and phone connection to closed-loop capture, saving, and SHARE PointClouds Studio V2.6 inspection

      Figure 2: For your first scan, complete the device checks, closed-loop capture, save confirmation, and SHARE PointClouds Studio V2.6 quality inspection in sequence. Preparation: Choose one indoor room. For your first attempt, start with a single room rather than scanning an entire building. Steps:

      1. Start near the room entrance and hold the device steady, with its front facing forward;
      2. Start scanning in the app, then walk forward smoothly at a steady pace with the front of the device facing ahead;
      3. Walk once around the room: Follow the walls and return near your starting point to close the loop. Loop closure can help constrain accumulated drift;
      4. Monitor as you walk: Watch the point-cloud preview in real time and rescan any obvious gaps on site;
      5. End the scan: After completing the loop, end the scan and wait until the app confirms that saving was successful before powering off or removing the card. Powering off or removing the card too early can leave the data incomplete;
      6. Copy the complete project: Copy the entire raw project from the TF card to local storage without changing the original directory structure or filenames;
      7. Post-process: Create a new project in SHARE PointClouds Studio V2.6 and add the raw data. Configure colorization, mapping optimization, global navigation satellite system (GNSS)/control points, and output formats before processing. After reconstruction, use the linked photo, photo-point, and 3D viewport views to review the processed result. When multiple capture tasks need alignment, process the tasks separately and then use manual corresponding-point registration rather than assuming that the software aligns them on its own.

      Four Essentials for Your First Scan

      Essential What to Do Why
      Steady pace Walk smoothly at a steady pace; avoid sudden stops and turns Speed changes can cause trajectory jumps
      Closed loop Return near the starting point and overlap the initial route Helps constrain accumulated drift
      Monitor the preview Check coverage in real time and fill gaps on site Avoids a second site visit
      Wait for saving Power off and remove the card only after saving succeeds Prevents incomplete data

      Frequently Asked Questions

      Q1: How long does a first scan take? Scan duration depends on room size, route complexity, site conditions, coverage requirements, and the need to revisit occluded areas. Use a small pilot room to estimate timing for the actual project rather than relying on a fixed area-to-time ratio.

      Q2: Does the phone need to remain on throughout the scan? Yes. The mobile app provides the real-time preview, controls scanning, and confirms saving. If the phone disconnects during scanning, the device supports automatic reconnection. The key requirement is to save successfully when the task ends.

      Q3: Can it scan indoors without GPS? SHARE SLAM mapping does not require GPS, so indoor, underground, and tree-covered environments can be evaluated. Actual usability and deliverable quality still depend on the model configuration, scene geometry and materials, occlusion, route design, and quality-control results.

      Q4: How do I process the data after my first scan? Back at the computer, copy the complete raw project, then use SHARE PointClouds Studio to create a new project → configure the parameters and process the data → inspect the trajectory and photo coverage → crop and level → perform manual registration, coordinate transformation, or accuracy checks as needed → export a supported point-cloud format. Computer-aided design (CAD) drawing export simultaneously generates drawing exchange format (DXF) and DWG files and includes them in the exported ZIP package. RVT, IFC, and complete building information modeling (BIM) models remain downstream professional workflows.

      Q5: Is the device heavy? Weight varies by model and accessory combination; refer to the current product specification sheet. Before handheld fieldwork, evaluate handling, battery life, and battery-swap arrangements along the actual route. Projects requiring control points or independent check points should still place markers according to the acceptance plan.

      PROJECT SUPPORT

      Need help with your project?

      Tell us about your scanning environment, accuracy requirements and target deliverables.
      Contact our team

      PROJECT SUPPORT

      Need help with your project?

      Tell us about your scanning environment, accuracy requirements and target deliverables.
      Contact our team

      Reading next

      Handheld SLAM or a Panoramic Camera Solution? Comparing SHARE SLAM with Panoramic Capture Solutions

      Handheld SLAM or a Panoramic Camera Solution? Comparing SHARE SLAM with Panoramic Capture Solutions

      Sep 12, 2026
      What Are the Best Practices for SHARE SLAM Scanning? Route Planning, Pace, Loop Closure, and Field Checks

      What Are the Best Practices for SHARE SLAM Scanning? Route Planning, Pace, Loop Closure, and Field Checks

      Sep 14, 2026

      Sign up for new stories and personal offers

      Footer menu

      • Search
      • Privacy Policy
      • Refund Policy
      • Shipping Policy
      • Terms of Service

      About us

      IDEAL FOR 3D MAPPING

      SHARE3DCAM helps professionals capture, reconstruct, and use real-world spaces more effectively. Through spatial cameras, LiDAR scanners, and 3D mapping workflows, we serve surveying, AEC, inspection, renovation, and spatial digitization applications—bringing reality into usable 3D space.

      Country

      • American Express
      • Apple Pay
      • Bancontact
      • Google Pay
      • Mastercard
      • MB WAY
      • PayPal
      • Shop Pay
      • Union Pay
      • Visa

      © 2026, SHARE3DCAM