Skip to content
Search
  • Home
  • Products
    • 3D LiDAR Scanners
      • SHARE SLAM S20
      • SHARE SLAM S20 SE
      • SHARE C1 PRO
      • SHARE C1 3D Spatial Camera
      • SHARE SLAM S100 Series
    • Quick S20 Links
      • S20 · US Warehouse
      • S20 · EU Warehouse
      • S20 · UK Warehouse
      • S20 · Global
      • S20 · Certified Demo Unit
    • Accessories
      • Surveying Pole Adapter
      • Adapter For Robot Dog
      • RTK Module Kit
    • Shop by Delivery Region
      • Global / CN Warehouse
      • US Warehouse
      • EU Warehouse
      • UK Warehouse
      • View all delivery regions
  • Support
    • Download APP
    • Resources
      • Solutions
      • Guides
      • News
    • Quick Guide
      • SHARE SLAM S20
      • Unboxing & First Check
      • Data Processing
    • Software Introduction
      • SHARE PointClouds Studio
  • Redeem Gifts
    • Redeem Gifts
    • SHARE3DCAM Works
  • Contact
  • About Us
SHARE3DCAMSHARE3DCAM
  • Country

  • Search
  • Login
  • Cart
    0 items 0
  • Home
  • Products
    • 3D LiDAR Scanners
      • SHARE SLAM S20
      • SHARE SLAM S20 SE
      • SHARE C1 PRO
      • SHARE C1 3D Spatial Camera
      • SHARE SLAM S100 Series
    • Quick S20 Links
      • S20 · US Warehouse
      • S20 · EU Warehouse
      • S20 · UK Warehouse
      • S20 · Global
      • S20 · Certified Demo Unit
    • Accessories
      • Surveying Pole Adapter
      • Adapter For Robot Dog
      • RTK Module Kit
    • Shop by Delivery Region
      • Global / CN Warehouse
      • US Warehouse
      • EU Warehouse
      • UK Warehouse
      • View all delivery regions
  • Support
    • Download APP
    • Resources
      • Solutions
      • Guides
      • News
    • Quick Guide
      • SHARE SLAM S20
      • Unboxing & First Check
      • Data Processing
    • Software Introduction
      • SHARE PointClouds Studio
  • Redeem Gifts
    • Redeem Gifts
    • SHARE3DCAM Works
  • Contact
  • About Us

Country

Account
0

Your cart is empty

Continue shopping
Purchase & Support

How Should You Prepare for a SHARE3DCAM Demo or Pilot Test? A Practical Checklist

Prepare a more useful SHARE3DCAM demo or pilot test by defining representative scenarios, coordinate requirements, registration, sections, acceptance checks, and target deliverables in advance.
Oct 8, 2026
5 min read
How Should You Prepare for a SHARE3DCAM Demo or Pilot Test? A Practical Checklist

On this page

    On this page

      A Demo Is More Than an On-Site Preview

      An effective demo should use a handheld simultaneous localization and mapping (SLAM) scanner such as the SHARE SLAM S20, SHARE SLAM S20 SE, SHARE SLAM S100, or the SHARE C10 Series to capture data at a real site and process it in SHARE PointClouds Studio through the agreed deliverables and checks. The following checklist applies to presales demos, procurement evaluations, and trial runs by delivery teams.

      Closed-loop real-world project pilot test covering preparation, capture, office processing, independent checks, DXF verification, and results documentation

      Figure 1: A real-world project pilot test proceeds through preparation, capture, office processing, independent checks, DXF verification, and results documentation.

      Pre-Test Preparation Checklist

      Project and Model

      • Document the project type, area, number of floors, indoor/outdoor scope, and key risk areas.
      • Specify the candidate models and the reasons for selecting them: SHARE SLAM S20, SHARE SLAM S20 SE, SHARE SLAM S100, and the SHARE C10 Series may be included in testing based on the scenario.
      • Assign a data capture operator, office-processing operator, computer-aided design (CAD) reviewer, and customer acceptance representative.

      On-Site Route and Data

      • Mark the start and end points, loops, stairs, elevators, long corridors, glass, black surfaces, and indoor-outdoor transition areas on the floor plan.
      • For multi-segment or repeated scans, reserve fixed corresponding feature points that are identifiable, appropriately distributed, and non-collinear.
      • If testing engineering coordinates, prepare a control-point CSV and keep the control points separate from the independent check points.
      • If testing post-processed kinematic (PPK), prepare the rover, base station/observation station, and navigation files. Generate an RTKLIB POS trajectory file in an external PPK tool, then select it only as the Trajectory Source in global navigation satellite system (GNSS) fusion through GNSS Fusion.

      Deliverables and Opening Environment

      • Confirm the point cloud format: LAS, PLY, PCD, E57, or RCS.
      • Use the CAD drawing export, which simultaneously generates drawing exchange format (DXF) and DWG files and includes them in the exported ZIP package, and record the target CAD software and version.
      • RVT, IFC, and complete BIM models are downstream professional conversion or modeling outputs. Clearly assign their generation and manual review to professional CAD, building information modeling (BIM), or SketchUp personnel.
      • If 3D Gaussian splatting (3DGS) is required, list “photorealistic viewing” as a separate validation item rather than using it as a basis for dimensional, accuracy, or CAD acceptance.

      What Steps Should Be Performed During the Demo and Office Processing?

      1. Complete copy and project creation: Preserve the original directory structure and filenames, and confirm that the data passes validation and can be added to the project.
      2. Point cloud reconstruction and trajectory inspection: Review task progress, point cloud coverage, and trajectory continuity. When photo verification is required, synchronize the floor plan, trajectory, photo points, photos, and 3D viewport.
      3. Manual corresponding-point registration: Select the reference point cloud and the point cloud to be registered, pick corresponding points distributed across the entire area, inspect the error, and output original_name_registered.las.
      4. Coordinate transformation: Match at least three valid control points, or enter confirmed XYZ translation, XYZ rotation, and scale parameters. After verification, output original_name_converted.las.
      5. Independent quality checks: Perform separate 3D and elevation checks and save the reports. Control points must not also serve as check points.
      6. Photorealistic viewing: If testing 3DGS, verify the photo prerequisites, graphics processing unit (GPU) memory, and stability in large scenes, and clearly define its viewing limitations.

      What Should the Results Record Include at a Minimum?

      Record Item Required Information
      Test conditions Site, weather, route, model, configuration, and workstation
      Coverage and trajectory Missing areas, abnormal locations, trajectory continuity, and photo correspondence
      Registration and coordinates Corresponding-point distribution, errors, number of control points, parameters, and output filenames
      Accuracy checks 3D report, elevation report, independent check points, and project tolerances
      CAD deliverables Section width, exported DXF and DWG files, target software version, and issues found during manual review
      Stability and support Task success/failure/cancellation, retry results, logs, and issue descriptions
      Manual effort Time spent on capture, processing, correction, and review

      Failed or canceled tasks can be retried. When support is required, retain the raw data, project, deliverables, and local diagnostic information. Without an available network, login may not complete, some advanced functions such as 3DGS may not work normally, and logs cannot be uploaded.

      How Should Pass Criteria Be Defined?

      Pass criteria should be established in writing before the pilot test.

      For example: complete coverage of key areas; traceable _registered.las and _converted.las files; independent 3D and elevation checks that meet project tolerances; and an exported ZIP package containing both DXF and DWG files, with both opening in the target software version and passing manual review. Do not substitute “looks good” for quantitative evaluation, and do not generalize the results from one scenario to other projects.

      Frequently Asked Questions

      Q: Can we schedule only half a day of on-site scanning without office processing? This can provide a hands-on experience, but it is not enough to support a purchasing decision. At a minimum, complete reconstruction, quality checks, and verification that the target format opens correctly.

      Q: Why should a demo include manual corresponding-point registration? The ease of aligning segmented, repeated, or cross-area captures directly affects delivery efficiency. Registration should generate a _registered.las file; merging cannot replace registration.

      Q: Why does coordinate transformation require at least three valid control points? The software needs enough valid correspondences to calculate the transformation parameters. You should also verify the control-point distribution, XYZ order, and units, and validate the _converted.las file using independent check points.

      Q: How should 3DGS be accepted during a pilot test? Evaluate it based on photorealistic viewing, photo quality, and operational stability. Dimensions, accuracy, and CAD acceptance should still be based on the point cloud and inspection reports.

      Q: What should be submitted after a test task fails? Retain the complete raw data, project, deliverables, and logs. Record the workstation environment, task stage, and observed error. Failed or canceled tasks can be retried in Task Management.

      PROJECT SUPPORT

      Need help with your project?

      Tell us about your scanning environment, accuracy requirements and target deliverables.
      Contact our team

      PROJECT SUPPORT

      Need help with your project?

      Tell us about your scanning environment, accuracy requirements and target deliverables.
      Contact our team

      Reading next

      How Should You Troubleshoot SHARE3DCAM Installation, Capture, Processing, and Export Issues?

      How Should You Troubleshoot SHARE3DCAM Installation, Capture, Processing, and Export Issues?

      Oct 7, 2026

      Sign up for new stories and personal offers

      Footer menu

      • Search
      • Privacy Policy
      • Refund Policy
      • Shipping Policy
      • Terms of Service

      About us

      IDEAL FOR 3D MAPPING

      SHARE3DCAM helps professionals capture, reconstruct, and use real-world spaces more effectively. Through spatial cameras, LiDAR scanners, and 3D mapping workflows, we serve surveying, AEC, inspection, renovation, and spatial digitization applications—bringing reality into usable 3D space.

      Country

      • American Express
      • Apple Pay
      • Bancontact
      • Google Pay
      • Mastercard
      • MB WAY
      • PayPal
      • Shop Pay
      • Union Pay
      • Visa

      © 2026, SHARE3DCAM